3rd Work : Resin Art - Ocean waves on Wood 🌊

I'm Dr.Poxy.

My Channel is https://bit.ly/2RpqpbK.

You can subscribe to channels you like to see more content from my channel.

Finished work.

The difficulty of work is hard.

Difficulty	⭐⭐⭐⭐
Working Days	4 Days

I saw thin wood in the corner and got to work.

I worked on it a few times, but it was the most difficult to keep the wave shape.

Basically it should be horizontal.

And the flow is different depending on the thick viscosity of the resin.

The powder type is better for the pigment.

It is because the viscosity is thick and high.

Thick viscosity can be used after 2~3 hours after mixing.

Then you will can reduce probability of failure.

Now... the basic knowledge has been given.

Give it a shot.. 😊😊😊

Prepare is...

- Resin & Hardner

- Resin Pigment (blue, yellow, white)

- Thin wood

- Sand (shell or stone)

- Hit gun or dryer

If you look at the work video, you can work more easily..

The similar ones..

(After completion, there is no picture, so I use the picture I was working on.)

Thank you for reading the article.

Subscribe and like can make better videos. 😁😁😁

#resinWaves #resinWave #resinArt #resinTutorials #resinTutorial #resinDIY #DIYresin #HowtoMake #HowTo #DIY